#Hanging on plaster and lath walls Patch

Hanging Art on Plaster WallsĬommon in older homes, plaster makes for an attractive surface but it too is more difficult to work with than drywall. Do be careful with your measurements as you’ll want to get it right the first time. Hanging art on a brick wall will likely send many people to the hardware store for a masonry drill bit and the appropriate hardware, but this is still a DIY project for those comfortable using a drill. (And I recommend also using a masonry anchor or sleeve if you’re drilling directly into the brick.) And that’s it. From there, get a masonry screw of the same thickness (or very slightly thicker, preferably) and screw it into the hole. In order to get started, I recommend a 1/8-inch masonry bit that you’ll use to drill a hole in the mortar or brick.

#Hanging on plaster and lath walls Patch

Both are suitable for hanging art on, but mortar tends to be more user-friendly and it’s much easier to patch should your art ever be removed from the wall. There are two elements to a brick wall: the brick itself and the mortar that holds the bricks together. So if you have drywall throughout your home, go ahead and get those pictures hung! Hanging Art on Brick Wallsīrick is a trickier substance to work with than drywall, but that doesn’t mean you can’t hang your art on it with relative ease. And in the event a mistake is made, the cost of fixing that mistake is small. Hanging pictures on drywall is a straightforward project that can be tackled by anyone comfortable with a hammer and nail. And if you happen to make a mistake and find yourself with unwanted holes in the wall, all you’ll need is a little spackle and paint to clear things up. Simply purchase hangers that are rated for the weight of your art, make your measurements, and gently hammer your hanger & nail into the wall. And unless you’re hanging something really heavy – like 100 pounds heavy – you don’t even need to find the stud. All you’ll need is the tools listed above and a common art hanger. And that’s a good thing because when it comes to hanging art, drywall is a very friendly surface. Over ninety percent of interior walls are constructed using drywall, so chances are high that this is the wall material you’ll be working with. So without further ado… Hanging Art on Drywall And that’s because the vast majority of art will be hung on drywall. Chances are you already have these tools in your kit, and they’re all you’ll need for the vast majority of hanging projects. Regardless of the scale of your wall hanging project, there are a few tools that you simply cannot do without: For example, can I hang art on a brick wall? Do I always need to find the wall stud? What tools will I need? We’ll set out to answer these questions and more in this segment of our Art 101 series.

Wait, there’s still more? Yes, but just a few final questions that will help you to hang any piece of art on any type of wall. Tap in a hanging hook on each corner mark.While we created a comprehensive guide to hanging art, there are still a few questions that remain unanswered.Draw short pencil lines along the upper right- and left-hand corners of the 1×2.Use a torpedo level to align the 1×2 perfectly level. Align the center mark on the 1×2 with the second line.Draw a second line to represent the position of the hanging wire. Take the measurement from the previous step and measure down from the short line marked on the wall.Measure down from the top of the mirror to the top of the 1×2.Pull the 1×2 tightly under the hanging wire on the back of the mirror.Take a 12-inch-long piece of 1×2 and mark a centerline at 6 inches.

Mark a short line on the wall to represent the top edge of the mirror.

For drywall, start by weighing the mirror to ensure you don’t exceed the capacity of the hanging hardware.

Tighten the screw with a screwdriver until toggle bolt contacts the back of the wall.

Thread machine screw through toggle bolt nut, then pinch flat the wings on the toggle and push it through the hole in the wall.

Drill hole through plaster large enough to accept the toggle bolt.

To hang mirror on a plaster wall, use a toggle bolt outfitted with a picture-hanging hook.

In this video, This Old House general contractor Tom Silva shares tips and techniques for safely hangings framed objects on walls.